Build Your Own Device
For your final electronics project you will be building your own device. Make sure to read through the requirements below. Don't forget if something says to use the "minimum" that would be a C grade. To get an A or B you must go beyond the minimum!
1
You will need to use a minimum (remember the minimum is a C!) of 3 of the following basic components in your design. Multiples of the same component can count towards that if they do different things. For example the 3 buttons changing the colors of the RGB Led. Advanced components are optional, but may earn you extra points.
Basic Components
Servo with the fan.
Any color LED or the RGB LED.
Buttons
Buzzer
Potentiometer switch
Advanced Components
Using an advanced component may require some programming but may earn you extra points!
Tilt switch
Photoresistor
Thermistor
LCD screen
2
Design your prototype using Tinkercad, get it working, then share it with the teacher at 10088103@k12.hi.us. Once approved you can begin building your real design. You can't use build a design you already made! However, you can use what you learned from the other projects to build something new. For example wiring a series of lights can be done similar to your other projects, but you can't just build 3 lights with 3 buttons - you already did that!! The more unique or different your project is the better.